EdTech, Artificial Intelligence, Software

Robotics Test & Troubleshooting Technician

Watertown, MAOnsiteFull TimePosted 1 month ago

Is this role right for you?

Upload your resume and get a skill-by-skill breakdown — see exactly where you match, where you're close, and what to highlight. Not a mystery percentage.

Get a tailored resume highlighting what this role needs.

Required skills

robots
assembly line
power up
test
document
ship
repair
commissioned
repaired
brought up

Nice to have

military electronics
avionics
field service technician
cobot
AMR
AGV

Role summary

Seeking a Robotics Technician experienced in bringing up and testing robots fresh off the assembly line. Responsibilities include powering up, troubleshooting, repairing, and documenting electromechanical systems, specifically autonomous palletizers. The role requires hands-on experience with machine commissioning, reading electrical schematics, using multimeters, and a methodical approach to problem-solving. Experience with CAN bus, Linux, and wiring certifications are a plus. This is an onsite role focused on ensuring robots are fully tested and ready for customer deployment.

About Tutor

Tutor Intelligence builds and ships autonomous robots out of our factory in Watertown, MA. Our robots move boxes and pallets for businesses from family-owned manufacturers to some of the largest brands in the world. Every robot you release goes to work in a real warehouse.

Is This You?

This is a full-time, hourly ($38–$50/hr), on-site technician role on our production floor. You'll spend your day with a meter, hand tools and robots, not at a desk. If your background is mainly software, simulation or academic research, this isn't the right fit.

Must be authorized to work in the US without sponsorship. We are not able to sponsor visas for this role.

The Role

You'll take a robot fresh off the assembly line, power it up, bring every system to life, and own it until it's tested, documented and ready to ship. When it doesn't work, and some won't, you'll find out why with a meter and a schematic, fix it, and make sure it stays fixed.

This isn't a pass/fail checklist job. If you've commissioned, repaired or brought up complete machines (robots, packaging lines, AGVs, CNC or similar), this is your kind of work.

The robot is an autonomous palletizer: a collaborative robot arm on a battery-powered mobile base, with vacuum tooling, sensors and safety circuits. Every one you release goes to a real warehouse. You're the last set of hands before the customer.

What You'll Do

Receive robots from the assembly line, inspect wiring workmanship and perform a safe first power-up

Power up and check out each system: batteries and DC power, wiring, robot arm, drive motors, sensors, vacuum tooling and safety circuits

Run our setup, firmware and calibration tools following our procedures

Run functional and final acceptance tests, including multi-hour continuous runs

Troubleshoot electrical, mechanical and setup failures down to root cause

Repair within approved procedures, then retest to prove the fix

Log failures, repairs and test results against each robot's serial number

Prep robots for shipment: final checks, battery charge, arm stowing and paperwork

Bring recurring problems to Production Engineering and Quality so they get fixed at the source

Help train other technicians and write troubleshooting guides

Follow electrical safety, ESD, lithium battery and lockout procedures

What Success Looks Like

90 days: You bring up, test and release robots on your own, and your failure logs are clear enough that engineering can act on them without asking you twice.

1 year: You're the go-to troubleshooter on the floor. Robots you release don't come back for issues we should have caught, and the guides you've written help new techs get up to speed faster.

What You Bring

2+ years working as a technician troubleshooting and repairing electromechanical equipment: robots, industrial automation, field service, avionics, military electronics, AGVs, packaging or CNC

Experience bringing machines up or commissioning them, not only assembling or running checklists

Comfort reading electrical schematics, wiring diagrams and assembly drawings

Confident with a multimeter on power, wiring and signal problems

A sharp eye for wiring quality: crimps, ferrules, connector pins, strain relief and routing

Working knowledge of DC power, motors, actuators, sensors and connectors

A methodical approach: form a hypothesis, test it, find the cause, verify the repair

Clear notes and communication, including knowing the difference between a confirmed cause and a guess

Willingness to work extended hours during production pushes

A degree is not required

Physical requirements: stand, kneel and reach for a full shift on the production floor; lift up to 50 lb; wear steel-toe shoes and PPE (we reimburse shoes up to $100); work safely around lithium batteries and moving robots

Nice to Have

Military electronics, avionics or field service technician background

Cobot, AMR/AGV or battery-powered equipment experience

Oscilloscope or CAN bus tools

Basic Linux command line or networking

IPC/WHMA-A-620 or similar wiring certification

Technical school or associate degree

Why Join

Own the robot. You don't just run a step. You take a robot from first power-up to ready to ship.

Your fixes stick. Problems you find go to engineering and get fixed at the source, not worked around forever.

Grow your skills. Work alongside hardware and production engineers on robot arms, mobile bases, batteries and safety systems.

Real impact. Every robot you release goes to work at a customer site.

How We Work: Our Values in This Role

We hire against our values, and we'll interview you against them too. Here's what they look like in this seat:

Love of the Game. Getting a dead robot running again is the best part of your day.

Gumption. You don't wait for someone to tell you what's wrong. You grab the schematic and go find it.

Beginner's Mindset. You ask why it failed, not just how to get it running, and you learn every system on the robot.

Belief in Each Other. You write it down clearly so the next tech and the engineers can trust what you found.

Keep Moving Forward. When the line is pushing, you stay methodical and keep robots moving.

Customer Obsession. You're the last set of hands before the customer. Nothing leaves that you wouldn't put your name on.

Why Tutor?

Whether you’re designing robots, closing deals, running deployments, or creating the processes that help us scale, your work doesn’t sit on a shelf. It shows up on real production floors, making physical work safer and more affordable.

Our team is driven by curiosity and a genuine love of building. Everyone here takes real ownership, learns fast, and holds a high bar while having each other’s backs. If you love hard problems and creating things that didn’t exist before, you’ll fit right in.

Benefits

We take care of our team so they can do their best work. At Tutor, you’ll get:

Fully employer-covered health insurance, so you’re protected without the premium.
A managed 401(k) to help you plan for the future.
Generous time off: unlimited PTO and all federal holidays off for full-time salaried employees, and 16+ days of accrued paid time off plus 1.5x pay on federal holidays for hourly employees.
Regular in-office meals and team social events throughout the year.

As Tutor grows, so will our benefits. We’re continuing to invest in ways to support our team at work and beyond.

Tutor Intelligence is an equal opportunity employer and welcomes applicants from all backgrounds.

Ready to apply?

You'll be redirected to Tutor Intelligence's application page.